BACKGROUND AND PURPOSE: Knowledge about natural bleaches to remove stain may be useful in our daily life. Natural bleaches can be found in various types of fruits juice and many more. This green “bleaches” are more friendly to environment and cheaper than commercial product. Citric acid is one of bleaching agent that can be found in the citrus fruits such as lemon. This paper will discuss on the process of removing stains by citric acid in different type of fruit juices. The investigation was focused on “How does the type of citrus fruits used affect the rate of reaction of stain removable?” Since stains have different types, the effectiveness of citric acid on two types of stains (synthetic and vegetable based stain) had been discussed more in this investigation.
MATERIALS AND METHODS: The experiment was conducted with different type of fruits; lemon, lime, navel orange and pineapple. The time taken for the different type of stain to be removed by different type of fruits had been recorded and be analyzed to identify the most best used as natural bleaches.
RESULTS: Even though the lemon juice is more popularly known as natural bleach but based on the experiment, the best used citrus fruit as bleaching agent is lime and the citric acid is most effective used to remove vegetable based stain.
Table of Contents (Jump to)
4.1: Extraction of juices from citrus fruits
4.2: Citric acid determination
4.3: Procedure for stain removable
INTRODUCTION
Bleaches
Bleaches used worldwide in household to remove or decolorize stains which whiten or lighten the color of clothes. Chemically, bleaches will breaks the stain molecules into smaller molecule that easily be removed. D.Noemia Souza (2008) stated that “bleaches are chemical that capable to whitening the fabrics and removing stains by destroying colouring matter”. There are two types of reaction that involve in bleaching. Commonly bleaching process involves in oxidation processes such as hydrogen peroxide and some involve the reduction processes such as sodium chlorite. However in bleaching processes, the oxidation and reduction also can occur simultaneously. “Bleaching process for stains most effective when both an oxidative and a reductive bleaching steps worked together and this referred as “full” bleaching” (J.M. Cardamone & W.N. Marker, 1995) There are various types of bleaches, and each type of bleach is specifically used for certain type of fabrics. The fabrics are very specific and if used with wrong bleach, the fabric will wear out. Concentration, pH, time and temperature are the various conditions which are affect the action of bleach on fabrics.
Chemistry of Bleach
Hydrogen peroxide is the most prominent bleach and usually used in commercial bleaches. However, according to D.Noemia Souza (2008), the strongest bleach is sodium hypochlorite while the weakest is sodium chlorate and the hydrogen peroxide is milder.
Sodium hypochlorite(Chlorine-containing oxidants)
Usually, the sodium hypochlorite will contain 15-18% of chlorine (D.Noemia Souza, 2008). Under certain condition, the solution will decompose into sodium chlorite (eq1) which then reacts with hypochlorite and produce the sodium chlorate (eq2). The sodium hypochlorite will undergoes further reaction to release oxygen (eq3). Thus it is classified as “chlorine bleach”
2NaOCl NaCl + NaClO2… (1)
NaOCl +NaClO2 NaCl+NaClO3. (2)
Overall equation:
3 NaOCl 2NaCl+NaClO3 (3)
2NaOCl 2NaCl+O2 (4)
Hydrogen peroxide(preoxygen bleach)
Hydrogen peroxide bleaching will dissociates into H+ and per hydroxyl ions HOO-(eq1).The per hydroxyl ions is the active bleaching agent. Under alkaline conditions it will release oxygen (eq2).Cotton would damage under this conditions as the bleaching effect is slow and the bleaching rate is fast. The activator and stabilizers are added to control this condition (J.M. Cardamone & W.N. Marker, 1995).
H2O2 HO2- + H+.. (1)
2H2O2 2H2O +O2……………………………… (2)
Hydrogen peroxide is a universal bleaching and D.Noemia Souza (2008) said it is the only oxidizing bleach that can be safely used on protein.
Mechanism of Bleaching
Based on Procter&Gamble (2005) the process of bleaching is divided into two, which are;
Breaking up the stain
- The stain consist of molecule chains covering the fabrics
- The bleach molecule will break the stains into smaller pieces
- After that process, bleach molecule will disappear
- The stain is now broken into smaller pieces which can be easily removed by the surfactant
Decolorizing the stains
- The stains color has its origin in the double-bond connections
- Then, the bleach will break up the bond and convert it into single bond, eliminating its ability to absorb visible light.
- After that, the bleach molecules will disappear.
- Once the double-bond connections are broken up, the stains isn’t visible anymore.
Citric Acid as Natural Bleach
Citric acid is weak organic acid and one of the acids found in citrus fruits such as lime and lemon. It popularly used in food industrial as perservative. It also can act as natural bleaching agent and an antioxidant. So it is useful in our daily life to remove stain or dirt from fabric and bleach the spot. Citric acid exist in many type of vegetables and fruits but more concentrated in lime and juice where the dry weight of citric acid in fruit comprimise as much as 8 percent (sciencedaily.com).The concentration of cotric acid in fruits range from 0.005 mol/L for oranges to 0.30 mol/L in lemons and limes (Wiki.Org)
Rationale of the Study
Nowadays, most of people prefer to use biodegradable product or “green” product. Especially in current downturn economy, many people change to less expensive products. Using citrus fruits as an alternative ways to remove stain is the good choice. The question that arises here is what the significance of knowing which of the citrus fruits is best used in removing stains?
Get Help With Your Essay
If you need assistance with writing your essay, our professional essay writing service is here to help!
Significance of the Study
Sodium hypochlorite (chlorine bleach) and hydrogen peroxide (oxygen bleach) are extremely popular in the market to whiten the fabrics and in stain removable. However, there are some disadvantages using oxygen and chlorine bleaches. Most of them are hazardous if ingested or inhaled and should be used with care. Lindsay Evans (2009) also explained the chlorine can cause negative health effects. Besides, they are costly and give a bad impact to our environment especially rivers and lakes ecosystem. Chlorine that flowing into rivers or lakes will combine with other chemical to form a stable compound where it will remain unchanged in groundwater for many years (Wisconsin, 2010). On the other hand, citric acid best uses as natural bleaches because it does less harm to ecology of rivers and lake.
Limitation of the study
All of the experiment will conduct in the Mara College Seremban’s laboratory. Most of the material such as citrus fruits; lemon, lime, navel oranges and pineapple and table salt are obtained from Carrefour Cheras in Cheras, Selangor, Malaysia. So, all of the fruits are not in the same level of freshness due to different condition during storage that may affect the freshness of the fruits. Besides that, the fruits might not come from same tree and this will affect the concentration of acid in the fruits.
Research Question
The focus of study is to investigate the ability of citrus fruits as natural bleach to remove stain from fabric. The main objective of this study is to identify which of the citrus fruits; lime, lemon, pineapple, and navel oranges is best used as bleaching agent.
So the research question of the study is “How does the different type of citrus fruit used; lime, lemon, pineapple, and navel oranges affect the rate of reaction of stain removable?”
The study uses 4 different types of citrus fruits which are lime, lemon, pineapple, and navel oranges that will extract into juice and add with table salt (sodium chloride).
Hypothesis
The research question of the study is “How does the type of citrus fruits used affect the rate of reaction of stain removable?” The rate of reaction of stain removable is the highest at the most acidic solution. So the hypothesis is the most acidic fruit in this case is lime or lemon as both contains high concentration of citric acid.
Variables
Independent Variable
There are two independent variables in this experiment as the experiment is divided into several parts. The first independent variable is the different types of citrus fruit juices; lemon, navel orange, lime and pineapple. While the second independent variable is the different type of stains where synthetic stain (syrup) and vegetable stain(tomatoes) are used throughout the experiment.
Dependent Variable
Rate of reaction to remove the stain from fabric will be the dependent variable. The time taken will be record by stopwatch for the stain to decolorize. Then by using the graph the gradient is determine which represent the rate of reaction.
Fixed Variable
The fixed variables are type of cloth (cotton), volume of juice (5oml), temperature (100Ëšc) and volume (100ml) of water bath and quantity of sodium hydroxide (3 teaspoon). All of this material will be use in same quantity throughout of the experiment.
Apparatus and Materials
Material
Quantity
Fruit juices (lemon, lime, navel oranges, and pineapples)
50 cm3
100 Ëšc of water bath
100 cm3
Phenolphthalein
Distilled water
40 ml
Table salt
1.0M of NaOH solution
Dried KHP
3 teaspoon
10 cm3
1.0 g
4.0 Procedure and Analysis
Preparation of an approximately 0.1 M Sodium Hydroxide Solution followed by the Standardization of the Sodium Hydroxide
Before testing the concentration of citric acid, the standard sodium hydroxide solution needs to be prepared. In order to prepare 0.1 M of NaOH, 9.0 cm3 of 1.0M sodium hydroxide solution was diluted with 100.00cm3 of distilled water. Then the sodium hydroxide solution was standardizing to determine its concentration by titrated it with KHP. This acid base reaction is shown in Equation 1(M.L.Gillette, 1999);
KHP(aq) + NaOH (aq) NaKP(aq) + H2O(l)(eq1)
Two portion of 0.5g of dried potassium hydrogen phthalate (KHP) was weighed and dissolved with 50ml distilled water in conical flask. The Phenolphthalein solution was added for 2-3 drops into KHP solution to indicate the end point of titration. Phenolphthalein was used because the pH range of product is 8-10 .The sodium hydroxide was titrated with KHP solution until pale pink color was produced. The volume of NaOH solution added was recorded.
Data Collection for Standardization of NaOH
Number of trials
1sttrial
2ndtrial
Initial Burette reading/cm3 (±0.05cm3)
0.00
0.00
Final Burette reading/cm3 (±0.05cm3)
23.50
25.40
Volume NaOH solution added/cm3 (±0.05cm3)
23.50
25.40
Observation
After few minutes, the clear solution turned into pale pink before disappeared.
After few minutes, the clear solution turned into pale pink before disappeared.
Table 4.0
Data Analysis
The purpose to standardize sodium hydroxide solution against potassium hydrogen phthalate is to determine the exact value of sodium hydroxide concentration. By titrate the 0.1M of sodium hydroxide solution against KHP solution the results collected are more accurate. The concentration of sodium hydroxide was found to be 0.1002M
Calculation for determining the concentration of the sodium hydroxide;
KHP (aq) + NaOH (aq) NaKP(aq) + H2O
To calculate the number of mole of KHP
Number of mole= mass/molar mass
= 0.5g KHP/ 204.2
= 2.449Ã-10-3mol KHP
To calculate the number of mole of NaOH required to neutralized KHP solution
No. of moles of NaOH = No. of moles of KHP
= 2.449Ã-10-3mol NaOH
To calculate molarity of NaOH solution
Concentration of NaOH = (number of moles/ volume of NaOH)Ã-1000
= (2.449Ã-10-3/ 24.45) Ã-1000 = 0.1002M
Percentage uncertainty of the concentration of the 0.1M of sodium hydroxide
% Uncertainty of Concentration of 0.1M NaOH = Volume(H2O) + Volume(NaOH)+ Concentration of NaOH(1.0M)
% Uncertainty of VH2o = 0.04/100.00 Ã- 100
= 0.040%
% Uncertainty of VNaOH = 0.05/9 Ã- 100
= 0.600%
% Uncertainty of CNaOH = 0.040+ 0.600
=0.64%
Extraction of juices from citrus fruits.
The lemon was cut into small pieces and blend with blender. The juice released was putted into the beaker and labeled with A. First step was repeated again until half of the beaker filled. Then, the extracted juice was filtered through muslin cloth. The whole procedure were used again with another type of fruits, lime, navel orange and pineapple and labeled with;
Beaker
Type of juice
A
Lemon
B
Lime
C
Navel orange
D
Pineapple
Citric Acid Determination
The reason of citric acid determination is because to know the exact value of citric acid in juices for data analysis. This process is carried out by adding NaOH into the fruit juices. The approximately 10 mL of lime juice was prepared by using pipette and transferred into a conical flask. Then, the lime juice was diluted with 20ml of distilled water and three drops of phenolphthalein was added into solution. The solution with 0.1M sodium hydroxide (NaOH) was added from burette to the juice sample while swirling the mixture until the reaction mixture turned into faint pink color. The end point was reached when the pink color persists for thirty seconds. The volume of NaOH added was recorded. The processes were repeated again to increase the accuracy. Then, the procedure was repeated with different type of juice; lemon, orange and pineapple. By using the formula, the molarity of citric acid in the fruit juice was calculated.
Data Collection for citric acid Determination
Type of juice
Lemon
Number of trials
1sttrial
2ndtrial
3rdtrial
Volume of juice pipette/(±0.5)ml
10
10
10
Final burette
27.6
49.6
76.1
Initial burette
0
27.6
49.6
Volume of NaOH (±0.1)mL
27.6
22.0
26.5
Average Volume of NaOH
23.98
Qualitative Data
The colour of solution in conical flask change from white colour to faint pink colour.
Data Analysis- calculation for determining the citric acid concentration through sodium hydroxide added.
The citric fruits consist of citric acid. Citric acid contains carboxyl acid group and reacts with hydroxide ion as indicate in equation 2 (Dr. Ewa &Thomas, 2007). The sodium hydroxide will ionize to form sodium ions and hydroxide ions (eq 1).
NaOH (s) Na+ (aq) + OH – (aq) (eq 1)
C3H5O (COOH)3 (aq) + 3 OH- (aq) C3H5O(COO)33- (aq) + 3 H2O (l) (eq 2)
The purpose of this experiment is to determine the concentration of citric acid on the citrus fruit by titrating the citrus juice with standard sodium hydroxide solution. The concentration of citric acid can be calculated by measuring the volume of sodium hydroxide used (eq 3).
Molarity,M= (eq 3)
M1V1 = M2V2 (eq 4)
Based on the equation, the molarity of the OH- ions equal with sodium hydroxide as the molecular ratio is 1:1. So, the molarity of hydroxide ions can be known. By using equation 4, the concentration of citric acid can be determined.
Calculating the concentration of citric acid
By using the data given above, I had calculated the concentration of citric acid in citrus juices. The citric acid C6H8O7 is a triple basic acid that consists of three carboxylic acids and react with one hydroxide ion ,eq 1(Ewa Peter & Thomas M Moffet, 2007). In this experiment, I assumed that the citric acid is sole acid found in the citrus fruits.
C3H5O(COOH)3 (aq) + 3 OH- (aq) C3H5O(COO)3 (aq) + 3 H2O (l).(eq 1)
However, according to experiment conducted by Law.C& Solak.E(2009) the citric acid does not always have the 3 carboxylic acid. So, in this experiment I will assume that the citric acids only have 1 carboxylic acids but it’s less accurate. The following reaction takes place in the titration;
C6H8O7 + OH- → H2O + C6H7O7-………………… (eq 2)
Based on the equation(eq 2), the molarity of the OH- ions equal with C6H8O7 as the molecular ratio is 1:1. By using equation below, the concentration of citric acid can be determined.
M1V1 = M2V2
where :
m1 = molarity of Sodium hydroxide, NaOH
v1 = volume of Sodium hydroxide Solution, NaOH
m2 = molarity of dilute citric acids, C6H8O7
v2 = volume of dilute citric acids Solution, C6H8O7
Example of calculation: By Using the volume of NaOH use to titrate lemon juice
0.1M NaOH Ã- 23.98 ml = M2 Ã- 10 ml 0f C6H8O7
2.298 mmol OH- = M2 Ã- 10 ml C6H8O7
M2 = = 0.2398 mole/L C6H8O7
(The calculations showed above are applied to all other experiment, table 5.5)
Calculating Uncertainties
Percentage uncertainty of Concentration = [(Δn / n) + (ΔVolume / Volume)] x 100%
Example;
Percentage uncertainty of concentration for Lemon
=
= 6%
Absolute uncertainty of concentration = Percentage uncertainty x Concentration / 100%
Example for Lemon = 6% Ã-0.24/100%
= 0.014 moldm-3 0.01 moldm-
Data Presentation
Type of juice
Average NaOH used(±0.1)mL
Concentration of citric acid (mol/L)
Lemon
23.98
0.2398
Lime
10.78
0.1078
Navel Oranges
5.35
0.0535
Pineapples
2.95
0.0295
Table 4.6
Procedure for process of stain removable
The white cloth cotton was cut into3cmÃ-3cm size for 20 pieces and each pieces of cloth were stained with syrup solution. Then the stained clothes were dried for about 1 hour. 20 cm3 of lime juice was prepared and the initial pH of juice was recorded by using pH meter. For the first trial, a stained cloth was held under the running water and was soaked in the lime solution for more than 30 minutes. After that, the stained cloth was put into100Ëšc hot water bath and the time taken for the stained decolorize was recorded. However, the stained took longer time to decolorize where the average of time taken cannot be recorded. So I used another method by adding 3 teaspoon of table salt (sodium chloride) into lime juice. The pH value of juice was recorded. The stained cloth was rubbed with salt before soaked into the solution for an hour. Then, the stained cloth was putted into 100°C hot water bath and the time taken for the stained decolorized was recorded. In order to identify the best fruit best use to remove the stain, the whole step was repeated again with another type of fruits; lemon, navel orange, and pineapple. The results from different type of fruits were compared.
Besides that, I also used the different type of stain to test which one is more effective been bleached by citric acid. In this experiment I used vegetable based stain which is tomato stain. The first method is used; without adding the table salt (sodium chloride) and the result was recorded and be compared with synthetic stain (syrup).
Data Collection for Removable of stain
Qualitative data
For synthetic stain:
- The pink’s colour of stain turns into colourless.
- Fabrics become white
- Fabric cloths smell fruity.
- The juices become more slippery when added with sodium chloride.
- For organic stain
- The red colour of tomatoes decolorize
- The fabric colour turn into redish
- The fabric turns white after held under running water.
Data Analysis
According to the data collected, the different type of fruits and different type of stain will affect the time taken for the stain to decolorize. For the syrup stain, there must be influenced by sodium chloride (cooking salt) as it is hard to remove by citric acid alone. Adding the cooking salt involved the osmosis concept where the solution will become more saturated, the water will moving from the cloth to the salt and taking the stain together (T. Lister& J. Renshaw, 2000). When the cooking salt is added into the juice, the pH of juices drop and become more acidic. However, chemically the cooking salt does not affect the acidity of citric acid. The drop in pH value may be due the presence of water in the juices which react with the salt and release the hydrogen ions which might cause this to be happened. The reason putting stained cloth into the hot water is to increase the reaction by increase the movement of particle and reduce the time taken to remove the stain (Kenneth M.S, 1942). The highest rate of reaction (Table 4.9) calculated is lime juice and the lowest rate of reaction is pineapple juice. The reaction for both juices can be related with its pH and concentration. In term of concentration of citric acid, the higher the concentration of citric acid will increase the acidity of juice and the time taken for stain removable will become faster. However, this might not be true for lemon juices. Even though, it has highest citric acid concentration but the time taken for stain removable is not the fastest. This probably because of error and limitation occurred and will be discussed more in other section.
Meanwhile, graph 4.4 shows the rate of reaction of stain removable for both type of stain by using Microsoft Excel. It is show that the rate of reaction for removable stain in tomatoes stain is 0.154, higher than syrup stain. This is might be because the syrup stain is more thick and viscous. While the vegetable based stained (tomatoes) is easier to remove because it is organic in nature and more soluble in lemon juice.
8.0: Conclusion and Evaluation
Conclusion
The experiments showed that the type of citrus fruits used does affect the average time taken to remove the stain. The hypothesis that rate of reaction would be highest in the most acidic fruit (lime) which consist high concentration of citric acid, is also supported based on the data collected. The pH of lime is 2.2; most acidic among the others citrus fruits. The main objective of this essay is to identify which of the type of citrus fruits; lime, lemon, pineapple, and navel oranges are best used as bleaching agent. As mention above, the type of citrus fruit does affect the rate of reaction to remove the stain. However, it also depends on the type of stain. Test on fabric with synthetic stain without adding sodium chloride (salt) required a long time where the average time taken cannot be collected. Meanwhile, citrus fruits are best used on fabric with vegetable based stain as there in no influence with sodium chloride. It can be said that the sodium chloride act as catalyst and making the removable of stain easier. In addition, the time taken to remove the stain for vegetable based stain is fastest compare than synthetic stain. The hot temperature was used in the experiment to speed up the reaction. Thus it can be concluded that, the lime is the best used as bleaching agent but with certain condition; type of stain and temperature.
Find Out How UKEssays.com Can Help You!
Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.
View our academic writing services
Evaluation
Some error and limitation occurring during the experiment which causes the result collected imprecise. The limitation and errors in these experiments can be divided into several parts. For the first part is problem in procedure A. Initially, the sodium hydroxide prepared had been assumed exactly 1.00M. However, to test the accuracy of the concentration, the sodium hydroxide had been standardized using KHP solution. After calculating the concentration of the sodium hydroxide, the concentration of sodium hydroxide is approximately 0.1M with 0.2% of percentage error.
There is a limitation occur when calculating the concentration of citric acid by titrate it with sodium hydroxide solution. One problem is the citrus fruits contain several type of acid. So, in the experiment the citric acid had been assumed as sole acid in citrus fruits and be supported by Dr. Ewa &Thomas. As a result, the amounts of citric acid concentrations calculated are inaccurate and larger than theoretical value. The citric acid should been standardized to know the exact concentration, where it reduce the uncertainties. Besides that, some common mistake occurred in the experiment such as improper position of burette and parallax error in taking the measurement. To overcome this, there is no other solution except reduce the parallax error by positioning the eyes straight to the scale reading needed and position the apparatus used at the smooth surface. Moreover, it was hard to determine that the colour of the solution turned to faint pink colour because if the titration of NaOH was titrated without care the solution will become too red. So the result of the first faint pink colour come out should be observed and detected properly so it needs a particular partner in doing that job.
Based on data collected, there is error between the concentration of citric acid and pH value for lemon juices where supposedly the pH of lemon juice should be most acidic as it has highest citric acid concentration. The problem may arise in determining the citric acid concentration where the value of citric acid calculated in lemon juice was incorrect. Because of the lemon used are in different freshness (as mention earlier in limitation of study), it might affect the result. So, the same lemon must be use throughout the experiment.
In the last part (procedure D), one of the error occurs is during taking the average time taken to remove the stain from fabric. When the stained fabric is place into hot water, it is difficult to identify whether the cloth decolorize or not because it is possible for fabric to turn into white without be rub. To improve this, the experiment must be repeated for several times to increase the accuracy. There is also a limitation where the removable of stain cannot be seen clearly when test conducted with coffee at first. So, to overcome this problem, the stain was changed into syrup which the red colour can be seen clearly. However the problem had comes when there is change in pH value of fruit juice after adding with NaCl due to presence f water. This might be because limitation that occurred during extraction of juice. So, it is necessary to ensure all the equipment to rinse and dry first before conducting any experiment.
Recommendation for further research
More work could be done on the use of sodium chloride (cooking salt) in removing stain; is it effective used and how it will increase the effectiveness of citric acid in removing stain? The other use of citric acid beside remove stain should be investigated as if citric has potential in other cleaning process. Besides that, while the experiment was done by using citrus fruits as natural bleaching agent other natural bleaching agent should be considered. Investigation on the effectiveness of citric acid by comparing it with the commercial bleaches and color safer bleaches has applications in our daily life.
Cite This Work
To export a reference to this article please select a referencing style below:
