Enzymatic Functioning in Bromelain from Pineapple Juice

• William Nguyen

Introduction

An enzyme is a biological catalyst that accelerates specific chemical reactions. It converts substrates into specific products. Most enzymes are proteins and hence have a three-dimensional structure of folded polypeptide chains. Enzymes have an optimal temperature and pH range in which they function most effectively. If changes occur that remove the enzyme out of this range it may not function effectively. This principle forms the basis of this experimental design where the increasing temperature results in the denaturing of the enzymes found in bromelain and thus lowering its catalytic effectiveness.

Bromelain is a protein extract present in the fruit, leaves and stems of pineapple plants (Ananas comosus). Although it is present in all parts of the pineapple plant, the stem is the most bromelain rich part that also makes it the most common commercial source of bromelain (Rowan, Buttle & Barrett, 1990, p.869-875)¹.

The crude aqueous extract from the pineapple fruit is known as bromelain. It is in fact a mixture of different thiolendopeptidases and other components like phosphatases, glucosidases, peroxidases, cellulases, glycoproteins, carbohydrates and protease inhibitors (Maurer, 2001, p.1234-1245)². It is also known that the enzymes in the bromelain extract begin to denature when heated over 80°C (Jutamongkon & Charoerein, 2010, p943-948)³. Since bromelain is essentially a mixture composed of many different enzymes, its substrate spectrum is very broad. It extends from synthetic low molecular amides and dipeptides up to high molecular substrates such as fibrin, gelatin, casein and bradykinin (Cooreman, 1978, p.107-121)⁴. Pineapples are an excellent source of the trace element manganese which acts as an essential cofactor for many of the enzymes found in bromelain. In addition, thiamine also acts as a cofactor in enzymatic reactions central to energy production in bromelain (Joy, 2010, p.670-686)⁵.

Get Help With Your Essay

If you need assistance with writing your essay, our professional essay writing service is here to help!

Essay Writing Service

Historically, bromelain has been extracted and utilised for medicinal purposes by the natives of South and Central America. In modern society, bromelain has been proven to be effective at tenderising meat and as such, is sold commercially as powdered meat tenderisers. It has also earned universal acceptability as a phytotherapeutical drug because of its history of safe use and no side effects. In 1972, conclusive evidence that bromelain prevents aggregation of blood platelets was reported by Heinicke et al (1972, p.844-845)⁶. Bromelain also displays an anti-inflammatory and analgesic effect on soft tissue injuries especially in rheumatoid arthritis and osteoarthritis. It has also been found to dramatically reduce post-operative swelling and pain due to these properties (Leipner, Iten & Saller, 2001, p.779-789)⁷. Additionally, bromelain applied topically as a cream in a lipid base has shown beneficial characteristics in the debridement of eschar from severe burns and in the acceleration of healing. It has been commercially approved in Europe and sold under the trade name NexoBrid (Hauck, Chang & Klein, 1983, p.124-134)⁸.

Aim and Hypothesis

This experiment aims to qualitatively identify the enzyme functioning found in commercially sold canned pineapple juice using background information provided by previous experiments. The rate at which gelatin is degraded in this experiment by the bromelain provides an indication of the rate of enzyme activity. The fresh pineapple sample is known to be rich in bromelain and as such, will hypothetically result in a significant amount of gelatin degradation. Boiling the pineapple juice sample over 80°C will result in the denaturing of enzymes and should display little to no degradation of the gelatin. The canned sample in question may not display any degradation as it has undergone processing that may have disturbed the natural functioning of the enzymes in bromelain.

Materials

• 15 test tubes
• 12 petri dishes
• 3 test tube racks
• 3 metal tongs
• 3 plastic bottles
• 1 thermometer
• 1 timer
• 1 macropipette
• 1 straw
• Hot water baths (35^oC, 45^oC, 50^oC, 60^oC and 90-100^oC)
• 1 stirring rod
• 1 razor
• 1 ruler
• 1 fine black marker
• 1 water bath
• 1 electronic balance
• 1 pineapple
• 1 pineapple juice bottle
• 100g gelatin powder

Methods

Part A: Determining the degree of enzymatic functioning in canned pineapple juice

Preparation phase/Pre-lab

1. Place gelatin and hot water into 250mL jug and mix with stirring rod until gelatin has dissolved
2. Pour equal amounts into 12 labelled petri dishes and place in the cool room to set for a day
3. Make 3 pits in each dish by extracting gelatin using a straw when setting has complete
4. Draw, measure and record the diameter of the pit made using a black marker on to the bottom of a petri dish
5. Repeat step 4 for all petri dishes
6. Buy a can of pineapple juice and extract 15mL of the juice into a plastic bottle labelled canned pineapple juice
7. Purchase a fresh pineapple and cut into slices using
8. Juice all pineapple slices and boil half the juice collected
9. Place 15mL of boiled juice in a bottle labelled boiled pineapple juice and 15mL into a bottle labelled fresh pineapple juice

Proteolytic gelation phase

1. Divide the gelatin-petri dish samples up into 4 groups: control, boiled, canned and fresh.
2. Leave the controlled petri dish absent of pineapple juice
3. Pipette 3 drops of the labelled juices into corresponding petri dishes. Allocate one team member per variable group to minimise qualitative discrepancies
4. Cover the petri dishes and allow reactions to occur for 120 minutes at room temperature

Post-proteolytic gelation phase

1. Remove cover from petri dishes and describe/record physical differences of each group.
2. Tip any remaining juices out of the petri dishes
3. Draw new circles around the post-liquid pits, measure and record the new diameters into results table

Part B: Measuring the effect of temperature on enzymatic functioning in bromelain

Preparation phase/Pre-lab

1. Place gelatin and hot water into 250mL beaker and mix with stirring rod until gelatin has dissolved
2. Allow the gelatin to set in the cool room for a day
3. Cut out five 1.0 x 1.0cm cubes of gelatin using a razor blade
4. Allocate each cube a number from 1-10
5. Weigh and record the weight of each cube into the results table

Proteolytic gelation phase

1. Label five test tubes from 1-5 with a black marker
2. Place 10mL of fresh pineapple juice into each test tube
3. Heat test tube 1 using a water bath heated at 35^oC for 10 minutes
4. Remove the test tube from the water bath, using tongs, and place into test tube rack
5. Allow the test tube to cool down to room temperature by using a thermometer
6. Repeat steps 3-5 using test tubes 2-5 at temperatures 45^oC, 50^oC, 60^oC and 90^oC. Placing test tubes in a bucket of crushed ice may quicken the cooling process
7. Place allocated cubes of gelatin into respective tubes and allow to sit for 20 minutes
8. Separate juice from the gelatin cubes and rinse with distilled water
9. Allow gelatin cubes to completely dry
10. Weigh the gelatin cubes and record variances in results table

Results

Table 1. Degree of enzymatic functioning in various types of pineapple juice

Table 1 depicts data taken from part A of the experiment. Three trials were run for each type of juice to ensure reliable results. It is apparent that there is a large change in the diameter of the fresh pineapple juice samples compared to the other types tested. Whilst canned pineapple juice displayed a lower degree of change, the boiled sample however seemingly gained gelatin. The control sample did not display any changes in the diameter of the pit.

Figure 1. Step 1 of the proteolytic gelation phase (Part A)

Figure 2. Step 3 of the proteolytic gelation phase (Part A)

Recorded Observations

• Many air bubbles were formed during the pipetting of juices into the gelatin pits
• The diameter of the gelatin pits appeared to remain the same after a period of 120 minutes for canned, control and boiled pineapple juice
• Visible changes in hole size observed in fresh pineapple juice samples

Table 2. Effect of temperature on enzymatic functioning in bromelain

Table 2 depicts data taken from part B of the experiment. Like part A, three trials were made for each variable to ensure reliable data. As temperature applied to the juice increases, it is evident that the degree of weight loss of the gelatin decreased. However, test tube 2 displayed a result that deviated from this trend as the weight loss (%) dropped then rose again. The control sample displayed the highest amount of weight loss of the gelatin cube. The trend (not inclusive of the control) is represented in the figure below.

Figure 3. Effect of temperature on enzymatic functioning in bromelain­­

Figure 4. Step 3 of proteolytic gelation phase (Part B)

Figure 5. Step 4 of proteolytic gelation phase (Part B)

Recorded Observations

• Fresh pineapple juice retained a cloudy, yellow colour with froth formation on the surface of the juice
• During the cooling period, the pineapple pulp separates from the liquid and forms two distinct layers
• Gelatin cubes that were dropped into the test tubes rise to the top of the solution with pulp sediments resting on the bottom of the test tube

Discussion

Part A

It was supported by the results in Table 1 that fresh pineapple juice displayed a larger degree of enzymatic functioning compared to the other three sample types (boiled, canned and control). This is depicted through the change in the diameter of the gelatin pit. Enzymes in bromelain work to break down the gelatin and the larger the pit, the greater the functioning of those enzymes. The fresh pineapple juice sample showed an 18.18% change in the diameter of the gelatin pit.

Find Out How UKEssays.com Can Help You!

Our academic experts are ready and waiting to assist with any writing project you may have. From simple essay plans, through to full dissertations, you can guarantee we have a service perfectly matched to your needs.

View our academic writing services

The canned pineapple juice had a lower degree of change (5.49%). This may have stemmed from the preparation and processing of the juice that may have altered the integrity of the bromelain in the juice. It may have been subject to heating to sterilise the juice that may have caused the denaturing of the enzymes responsible for the breakdown of gelatin.

The boiled pineapple juice presented data that goes against the principle of bromelain breaking down gelatin. With a change in diameter of -1.18%, it has actually ‘gained’ gelatin after the proteolytic gelation phase. Since it is known that bromelain is responsible only for the degradation of gelatin, it is impossible for it to produce gelatin. Thus, this miscalculation may only have resulted from human error in marking and measuring the diameter. The marker used in this specific experiment produced rather thick lines relative to the small diameters that were measured. Use of a finer tipped marker may have minimised the chances of such inaccuracies to occur.

The control sample involved a set of gelatin plates with no pineapple juice added. This was made to ensure that the pineapple juice was responsible for the degradation of the gelatin. If the control displayed a change in the diameter of the gelatin pits, then the experiment would be deemed invalid as more than one factor contributes to the degradation of gelatin besides bromelain. In accordance to the results, the control group displayed no changes to the gelatin pits.

Part B

Part B of the experiment explores the effect of temperature on the enzymatic functioning of bromelain. From the data recorded in Table 2, an increase in temperature applied to the juice corresponds to the decrease in the functioning of the enzymes as depicted through the amount of weight the gelatin cube lost. This trend is illustrated in Figure 1.

Whilst there is an overall decrease in weight loss associated with increased temperature, there is an outlier at 45^oC. Although this variable was repeated thrice, it still remained inconsistent relative to the data set. Such an error may have occurred with the apparatus provided on the day of the experiment where there were only three water baths provided (37^oC, 50^oC and 90^oC). The experiment design took into account the equipment available that was provided in the laboratory manual that offered water baths at 35^oC, 45^oC, 50^oC, 60^oC and 90^oC. Hence, maintaining the pineapple juice at 45^oC and 60^oC using the apparatus provided was the most probable cause of the error. In the case of the 45^oC variable, it may have been heated too strongly that resulted in the denaturing of many more enzymes compared to at 50^oC and 60^oC. To improve upon this error, water baths with temperatures corresponding to those given in the laboratory manual should be provided to ensure accurate quantitative data.

As mentioned previously in the introduction, it is known from past experiments that the enzymes in bromelain begin to denature very quickly at 80^oC (Jutamongkon & Charoerein, 2010, p943-948)³. This experiment confirms the statement as the 90^oC variable experienced a steep decline in weight lost that indicates a large degree of enzyme denaturing.

Naturally, most enzymes have a temperature range that it functions most effectively at. However, this graph only portrays temperatures > 35^oC, not covering a large range of temperatures that is able to point out the optimum temperature. Again, this was not able to be accounted for in the experimental design due to the limited apparatus provided. From the trend line in Figure 1, a linear decrease is shown. However, a bell curve is usually representative of the optimum temperature where very low temperatures result in decreased enzyme functioning and decreased weight loss. As the temperature increases the enzyme reaches its optimum level of functioning and results in a large amount of gelatin degradation. With temperature reaching higher levels, the enzymes begin to denature and cease to function which brings the levels of weight loss down again. Relative to this experiment, the optimum temperature is ideally < 35^oC. In addition, the control displayed the greatest amount of weight loss compared to all the variables that were tested (36.14%). The control was not applied any heat but rather subject to room temperature which is ~20^oC. This reinforces the notion that the optimum temperature of the enzymes responsible for the breakdown of gelatin is < 35^oC. To validate this statement, the experiment should be repeated again but with a wider range of temperatures to account for the bell curve trend that should occur to identify the optimum temperature.

Reflective Comments

This experiment on bromelain was performed by three persons including myself. The first part of this assessment task was performed individually as per instructions. After we completed this task, we got together and planned the experimental design. Each person was assigned a role in this activity where I was tasked with completing the risk assessment and drawing scientific diagrams. The other two collaborators were responsible for completing the methodology and the list of materials and equipment. When we had completed our tasks, we discussed each part together to come to a mutual agreement. Many modifications were made to all parts that were essential to keeping our experimental design valid. Designing this experimental protocol with my classmates was a pleasant experience as each one of us were committed and contributed to the project. During this part of the project, no significant difficulties were faced as we all worked through our tasks smoothly. To me, teamwork was already a notion that I valued strongly, however this activity of getting together and completing such a large amount of work in so little time has definitely set that notion in stone.

The approach to allocating tasks to different members was also done on the day of the experiment. An action plan was formulated with all the roles and times of the tasks that have been allocated and given to each member of the group. A great reason for doing this is so that we can minimise human error in repetitive tasks. For example, I had a role in heating the juices in the given hot water baths. If two of us were to heat it, one may have a different way of regulating the temperatures 45^oC and 60^oC (the temperatures not given) than the other member. Hence, we assigned such roles to be consistent with the method. It also maximises productivity so that all of us are working rather than one person work with the other looking on to see if they can help.

The specific tasks that I have been allocated on this day was majority of Part B of the experiment. I was tasked with cutting the gelatin cubes, weighing and recording their weights, pipetting of juices into test tubes and heating the juices. After gelatin cubes have been dropped in and timed by another member, I removed, washed and dried the gelatin for the weighing process. In between my tasks where I had time I lent my assistance to my team members. At the end of the experiment we packed up the equipment and cleaned the lab bench so that we can sit down and discuss our results. The only minor problem experienced in this teamwork was the action plan. Some of the times allocated to specific tasks were under or overestimated. Although this is not necessarily a problem as we were provided three hours to conduct our experiment, it resulted in the clumping up of tasks where one member waited for another to finish their task to continue his/her own.

Overall, I am very happy and satisfied with the outcomes of our team project (possibly the best team project I have ever had!). With minimal difficulties and great results, I would definitely proceed to approach teamwork like this in future projects. However, this method of teamwork is only suitable if all team members are committed to their roles. If one does not pull their weight and not complete their allocated roles, the group could fall apart. Hence, it would be best for me to find myself a group of dedicated individuals in future projects.

References

Rowan AD, Buttle DJ & Barrett AJ, 1990. The cysteine proteinases of the pineapple plant, Biochem J, Volume 226, pp.869-875.

2 Maurer HR, 2001. Bromelain: Biochemistry, pharmacology and medicinal use, CMLS Cell Mol Life Sci, Volume 58, pp.1234-1245.

3 Jutamongkon R & Charoerein S, 2010. Effect of Temperature on the Stability of Fruit Bromelain from Smooth Cayenne Pineapple, Kasetsart J, (Nat. Sci.), Volume 44, pp.943-948.

4 Cooreman W, 1978. Bromelain, In: Pharmaceutical enzyme Properties and Assay Methods, R Ruyssen and A Lauwers (Eds), E Story – Scienta Scientific Publishing Co. Gent/Belgium, pp.107-121.

5 Joy PP, 2010. Benefits and uses of pineapple, Pineapple Research Station (Kerala Agricultural University), Vazhakulam, pp.670-686.

6 Heinicke RM, Van der Wal M and Yokoyama MM, 1972. Effect of bromelain on human platelet aggregation, Experientia, Volume 28, pp.844-845.

7 Leipner J, Iten F and Saller R, Therapy with proteolytic enzymes in rheumatic disorders, Biol Drugs, 2001, 15 (12), pp.779-789.

8 Hauck JC, Chang CM and Klein G, 1983. Isolation of an effective debriding agent from the stems of pineapple plants, Int J Tissue React, Volume 5, pp.125-134.